Post Tagged with: "Ecolibrium Solar"

Residential Mounting and Racking Buyer’s Guide 2020: The How-To Edition

Residential Mounting and Racking Buyer’s Guide 2020: The How-To Edition

June 1, 2020 at 9:31 am 0 comments

For this year’s Residential Mounting and Racking Buyer’s Guide, we asked residential rooftop mounting and rail system providers to tell us exactly how one of their systems installs and what the advantages might be for certain roofs and solar installation companies. Here is what they had to say. SunModo’s NanoMountRead More

C&I Buyer’s Guide 2020: Ground-mounts, rooftop racks, clamps and carports

C&I Buyer’s Guide 2020: Ground-mounts, rooftop racks, clamps and carports

May 6, 2020 at 11:02 am 0 comments

The commercial and industrial (C&I) solar segment continues to lag behind its potential, but it’s not for lack of structural systems. From lightweight rooftop innovations to cost-effective carports to classic fixed-tilt ground mounts, there is a mounting and racking solution to fit any C&I site. C&I rooftop solar systems SunModo’sRead More

MetalX Racking consists of three small components: the roof mount, universal XClamps that fit modules from 30-50mm, and preassembled Couplings to join modules structurally and electrically.

Ecolibrium Solar says its new rail-less metal roof solar mounting system uses 73 percent less aluminum

October 10, 2019 at 11:30 am Comments are Disabled

Ecolibrium Solar debuted its new MetalX Simplified Racking System for Metal Roofs at Solar Power International this year. Designed to eliminate the costs and shortcomings of installing solar on metal roofs, MetalX delivers a low cost per watt with 73 percent less aluminum, no long rails, fewer attachments, shortened installRead More

Residential Solar Mounting Guide 2019: Situations and Solutions

Residential Solar Mounting Guide 2019: Situations and Solutions

June 11, 2019 at 10:13 am Comments are Disabled

Solar installers face jobsite annoyances every day. Awkward roof space. Plastic baggies of tiny components. Missed rafters. And so on. Death by a thousand racking cuts. Luckily, for all of these situations, there is a mounting solution out there to make your life easier. Micro but Mighty It’s not theRead More

Solar System Wire Management Buyer’s Guide 2019

Solar System Wire Management Buyer’s Guide 2019

May 7, 2019 at 9:00 am Comments are Disabled

We humans have a lot in common with wires. We are vessels of energy and information that need grounding for stability. When put in situations that best suit our skillsets, we thrive. We are also prone to getting tangled up, stuck in our own way. We can be fragile. WeRead More

Wire you doing that? Top four solar installation wire management issues

Wire you doing that? Top four solar installation wire management issues

April 23, 2019 at 8:01 am Comments are Disabled

1. Cross-mating Cross-mating, which refers to the plugging of connectors from different manufacturers (between modules to optimizers/microinverters, modules to field-connectors, optimizers to field connectors or field connectors to the BOS system) is one of the most common PV wiring mistakes. In fact, the EU-funded Solar Bankability Project’s Failure Modes andRead More

Four energy dense solar mounting systems for C&I rooftops

Four energy dense solar mounting systems for C&I rooftops

June 20, 2018 at 10:00 am Comments are Disabled

SunModo SunBeam As a permanent part of the building and roof structure, the SunBeam system eliminates any abrasions, moss build up and need of system removal for roof repair or re-roofing. In addition, it provides shading of HVAC equipment, increasing efficiency and faster temperature response. Twenty-year warranty. Material: High-grade aluminumRead More

Ecolibrium EcoFoot system

Degrees of Separation: How to mount commercial rooftop PV systems to maximize energy

June 19, 2018 at 7:00 am Comments are Disabled

On commercial rooftops, design trends are all about maximizing energy density. Module selection is a huge factor there, but so are the layout and tilt decisions — figuring out the perfect shape and tilt to mount as many modules as possible without compromising their performance. Pairing the right racking systemRead More

Look at all of these. Installers often change modules based on availability, so being able to test in-house is a big time savings.

This is Certifiable: Ecolibrium Solar walks us through the UL 2703 testing process

February 5, 2018 at 9:30 am Comments are Disabled

Simplification is one of the key objectives of the solar industry, but the path to get there, ironically, is super detailed. Removing components to simplify a racking system, being compatible (and compliant) with a broad range of suppliers and just generally re-thinking what’s already been established is a deliberate andRead More

SB Buzz Podcast: Discussing rail-less mounting with Ecolibrium Solar

SB Buzz Podcast: Discussing rail-less mounting with Ecolibrium Solar

November 9, 2017 at 8:00 am Comments are Disabled

We ventured out to Boulder, Colo., to discuss rail-less solar mounting with Chris Berg and Jonah Coles of Ecolibrium Solar. Because it is Colorado, the Ecolibrium office was located like 50 feet from a brewery, Asher Brewing Co., so that seemed like a good place to chat. Click to listenRead More