“Self-flashing mounts” is perhaps a new term for the PV mounting industry. It is a unique concept, so let’s look at how it should be interpreted.
Perhaps we begin by interpreting the word “flashing” from the IRC (International Residential Code):
IRC R903.2 FLASHING
Flashings shall be installed in a manner that prevents moisture from entering the wall and roof through joints in copings, through moisture permeable materials and at intersections with parapet walls and other penetrations through the roof plane.
There is no specific standard about flashing for solar attachments to a roof.
So the real question as far as flashing goes, or as I’d like to say “where rubber meets the road” is how is the roof penetration being sealed up? The penetration being the very point of entry through the roof, the underlayment and into the wood by the lag or wood screw.
[button link=”https://sunmodo.com/nanomount/” bg_color=”#ffad08″ text=”dark”]Solar’s Fastest Attachment
Damaging roof shingles used to be one of solar installers’ worst challenges. Now, the easy, affordable solution is NanoMount™, SunModo’s newest solar mounting innovation. Learn more here. [/button]
With that in mind, one will realize that flashing really is nothing more than the sealant used on the very point of entry. Which brings us to the concept of “flexible flashing,” which is simply a synthetic material produced and tested for durability and water resistance used to seal the penetration on a roof in the case of our industry.
Self-flashing, then, is defined as the self-sealing of the penetration as the mounting gets fastened to the roof. So, the idea of self-flashing not only addresses the sealing of the penetration but usually avoids the breaking or disturbing the seal on roof asphalt shingles (steep slope roof).
Unlike “pipe flashings” or metal flashings, flexible flashing can be tested beyond the UL 441 standard for pipe flashing. Because of its flexibility and being 100 percent weatherproof, flexible flashing is tested under a column of water (hydrostatic pressure).
There are different types or formulations and all must be provided with an MSDS (Material Safety Data Sheet). The following is a list of mounts that are fastened with woodscrews right and a flexible flashing.
- Dynoraxx — Butyl tape
- Preformed Line Products — Butyl Tape
- ROOF TECH — Butyl Tape
- S-5 — Butyl Tape
- Sol Attach — Butyl Tape
To further evaluate products among manufacturers with flexible flashing, we recommend looking at the documentation provided and third party testing/certification. Roof Tech for instance has an ICC evaluation report maintained by the ICC Evaluation Services with yearly factory inspections for quality.
Milton Nogueira is the senior business development manager at Roof Tech, a wholly subsidiary of Yanegiken, a pioneer of self-flashing solar mounting systems since 1994 in Japan.
Have you checked out our YouTube page?
We have a ton video interviews and additional content on our YouTube page. Recently we debuted Power Forward! -- a collaboration with BayWa r.e. to discuss higher level industry topics as well as best practices / trends for running a solar business today.
Our longer running side project is The Pitch -- in which we have awkward discussions with solar manufacturers and suppliers about their new technology and ideas so that you don't have to. We discuss everything from residential rail-less deck attaching and home solar financing to large-scale energy storage value stacking and utility-driven new home solar + storage microgrids.