Scaling an energy storage system requires stacking both energy (batteries) and power (inverters).
Batteries that were designed to be modular can typically be stacked without limitation. However, inverter stacking presents more challenges. The question installers must answer is at what point does it make sense to jump from a multi-inverter stack of 48V inverters to a higher voltage inverter option.
Regardless of the energy storage demand, the power requirement of a project’s load profile is the most important factor when deciding whether inverter stacking or a high voltage inverter option makes sense for a project.
When considering a standard 48V battery-based inverter, stacking is limited to smaller outputs. In fact, most of the largest allowable 48V battery-based inverter stacks cap out at approximately 60 kW. That 60 kW is usually more than enough power to cover residential and even some small commercial systems. For systems larger than 60 kW, making the leap to a high voltage inverter is most often the best choice in order to achieve higher power output and cover larger loads, such as those seen in most commercial and industrial projects.
When deciding whether to stack 48V inverters or choose a higher voltage inverter, be sure to also consider the AC power demands of the project.
48V inverters are ideal for residential projects that consist of 120/240V AC loads, and high voltage inverters are best suited for commercial and industrial projects with 3-Phase 480V AC Power requirements. Choosing a high voltage inverter designed for a greater power output avoids expensive and long installation practices with extra equipment such as transformers and cabling.
Choosing the optimal inverter for the power demands of a given project ensures a less costly installation process and safer, more efficient energy storage system operation for the long term.
Have you checked out our YouTube page?
We have a ton video interviews and additional content on our YouTube page. Recently we debuted Power Forward! -- a collaboration with BayWa r.e. to discuss higher level industry topics as well as best practices / trends for running a solar business today.
Our longer running side project is The Pitch -- in which we have awkward discussions with solar manufacturers and suppliers about their new technology and ideas so that you don't have to. We've discusses everything from residential rail-less deck attaching and home solar financing to large-scale energy storage value stacking and utility-driven new home solar + storage microgrids.
We also post our Project of the Year announcements there! Interviews with this year's winners will be up starting the week of Nov. 8. Head there and subscribe today to stay on top of all this extra stuff.