Watch: How a single person can install Schletter’s G-Max fixed tilt racking

Steel solar mounting systems manufacturer Schletter kicked off its new blog last week with a quick tutorial on how to install its next generation racking system: G-Max. G-Max’s fixed-tilt construction is ideally suited for utility-scale installations, but here’s the wild part to us: The G-Max system’s fast and easy installation is so simple that a single person can install the girder, head adapter, and strut without assistance.

  1. Position the strut onto previously installed lower location bolt.
  2. Position head into upper location bolt.
  3. Install bolt at upper post.
  4. Tighten post bolts using 19 mm socket. The post will pull in tightly.
  5. Mark all the tightened bolts for quality control.

If you don’t believe it, check out the video above.

Tags:

Comments are closed.